theaddicted

Posts Tagged ‘HDD’

How To: Install Ubuntu on an external HDD (For those who are curious)

In Ubuntu on May 12, 2008 at 9:13 pm

OK, I know that this isn’t working for me, but you can go ahead and try for yourself if you want to put Ubuntu on an external HDD. There has been many searches on getting Ubuntu on an external HDD, so I’m posting this. I do warn you though, if you try this with your internal HDD in, you might damage it. Also, you will probably fail at this, just as a heads up. OK, now down to the instructions.

1. Format your external HDD to¬† ext3 or FAT32 or whatever you want it to be, it doesn’t matter as long as you wipe the hard drive clean.

2. Check your BIOS and make sure you are enabled to boot from an external USB device. (If you dont know what BIOS is then I highly recommend you don’t try this)

3. Put your copy of Ubuntu into the CD tray, turn off the computer, and remove your internal HDD. (If you leave it in very bad things will happen and you will lose everything).

4. Boot the computer from the CD and run a live session, make sure the external HDD is unplugged. (If you’re external HDD is plugged in at startup then the system will not boot)

5. Once it has booted, plug in the external HDD and wait for it to mount.

6. Click on the “Install” icon on the desktop, go through the language and time-zone steps, until the partitioner starts up.

7. Click on the second option that says “Guided – Use entire disk”. There should only be one drive that is found (sda), use it. If there is more than one drive in then exit the partitioner immediately, turn off the computer, and take out that other drive.

8. Partition the disk, it will unmount, but that is normal, go get a coffee or something because it will take longer than usual.

NOTE: If you get an error installing GRUB or anything else then you have to restart the installation. This may happen sometimes due to the fact that you are using USB.

9. After the installation the CD will prompt you to reboot, restart the system, let it load, and voila!

Finally got Ubuntu onto my external HDD, bombed it…again

In Ubuntu on May 9, 2008 at 4:24 pm

OK, this is a sad story. I figured out how to put Ubuntu onto my external HDD, what I did is leave my internal HDD in while booting from the CD, connecting my external, mounting it, and begin the installation process. When it gets to the part where it will create the partition, I removed my internal HDD, and told it to partition my external HDD. It finishes, and I use it, it worked. I test my internal HDD, it still works. I mount my external HDD, it finds it, I unmount. I try booting from my external HDD…doesn’t work. I think what happened was that when I mounted my external HDD it “forgot” that it was a HDD and started “thinking” it was a flash drive, don’t ask me how that happened, I still don’t completely understand it. While booting from the external HDD it started wanting to “mount itself”, I know to those of you with dirty minds that sounds kinda wrong, so it got stuck, the boot failed, and I had to boot from my internal HDD. I will try…again…tonight. If it doesn’t work I’ll just format it to ext3 and just use it for extra storage. I really want this to work, though. If it would then I could just have an internal HDD with Windows on it, and then just plug in the Ubuntu drive when I wanted to use it, and that would be really helpful. Oh well, trial and error is how everything we use today was made, but sometimes I just don’t have the patience for it…and now I am sad.

Your fellow web surfer,

The Addicted